Liftgate Latch Striker Replacement

Liftgate Latch Striker Replacement

Removal Procedure




1. Remove the lower trim panel from the lift gate.
2. Disconnect the electrical connector.
3. Disconnect the lock cable from the latch.
4. Remove the latch to lift gate fasteners.
5. Remove the latch.

Installation Procedure

1. Position the latch on the lift gate.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the latch with the fasteners.

Tighten the lift gate latch-to-lift gate fasteners to 10 Nm (89 lb in).

3. Connect the lock cable.
4. Connect the electrical connector.
5. Replace the lift gate lower trim panel.