Center Air Outlet Duct (LHD Only)

REMOVAL




1. Disable the SIR system. (Refer to "Disabling the SIR System".)
2. Remove instrument panel. (Refer to "HVAC Module" removal.)
3. Remove screws and center air outlet duct.

INSTALLATION




1. Install center air outlet duct and screws.

Torque:
Center Air Outlet Duct: 10 N.m (89 in-lbs)

IMPORTANT: Make sure that right plastic mounting tab is between knee beam and mounting bracket.

2. Install instrument panel. (Refer to "HVAC Module" installation.)
3. Enable the SIR system. (Refer to "Enabling the SIR System".)