Console 1 - Installation

1. Ensure park brake is applied.
2. Adjust front seats to most rearward position.
3. Recline driver's and passenger's seatbacks as far down as possible.
4. Select neutral for transaxle gear (on automatic transaxles).
5. Hold front end of console down and rear end up.
6. Position all harnesses so they can be accessed.
7. Maneuver console over gear selector lever and passed brake lever.
8. Connect CD Changer/Player connector. Verify that CD Changer/Player is functioning properly.




9. Connect power outlet electrical connector.
10. On automatic transaxle equipped vehicles, remove tape from gear selector.




11. Install rear console screws.

Torque:
Console Rear Fasteners: 2.2 N.m (19 in-lbs)




12. Install front console screws.

Torque:
Console Front Fasteners: 2.2 N.m (19 in-lbs)

13. Install left and right extension panels.
13.1 Insert extension panel hinges into console.
13.2 Close extension panel.
13.3 Push in extension panel at dual lock locations to secure in place.




14. Connect power window/mirror switch assembly connectors (if equipped).
15. Install power window/mirror switch assembly or storage tray (depending on equipment).