Cruise Control Servo Cable: Service and Repair

CRUISE CONTROL CABLE REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the cruise control cable from the cruise control module by turning the cable 1/4 turn counterclockwise.
2. Disconnect the cruise control cable (1) from the accelerator pedal.




3. Remove the cruise cable (1) from the vehicle.

INSTALLATION PROCEDURE




1. Connect the cruise control cable to the accelerator pedal.




2. Connect the cruise control cable (2)to the cruise control module ribbon (4).




3. Insert the cruise control cable into the cruise control module until the seal touches the module.

IMPORTANT: The ribbon must not be twisted.




4. Position the narrow cable tab into the narrow slot and the wide tab into the wide slot.
5. Connect the cruise control cable to the cruise control module by turning the cable clockwise.

IMPORTANT: The adjuster tab must be pointing toward the front of the car after installation.