Headlamp Assembly or Headlamp Bulb Replacement

HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENT

REMOVAL PROCEDURE
1. Open the hood.




2. Pull up on the headlamp retaining pins. Remove the pins.

IMPORTANT: Hold the headlamp to prevent damage to the headlamp or fascia.

3. Position the headlamp assembly away from the vehicle to access the electrical connectors.

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.

4. Disconnect the electrical connectors from the headlamp bulb/socket and the park/turn bulb, if necessary.
5. Remove the headlamp from the vehicle.




6. Remove the headlamp bulb retaining nut by rotating the nut counterclockwise.
7. Remove the headlamp bulb from the housing.

INSTALLATION PROCEDURE




1. Install the headlamp bulb into the housing.
2. Install the headlamp bulb retaining nut by rotating the nut clockwise.




3. Position the headlamp to the vehicle.
4. Connect the headlamp bulb and the park/turn bulb electrical connectors.
5. Install the headlamp retaining pins by pushing the pins downward.

IMPORTANT: Ensure that the retaining pins are properly seated in the headlamp bracket.

6. Close the hood.