Seat Belt Systems: Service and Repair

LOWER ANCHOR ASSEMBLY REPLACEMENT - REAR NO. 1

REMOVAL PROCEDURE
1. Remove the rear seat backs.
2. Remove the rear seat cushion.




3. Disconnect the battery cable from the anchor assembly.
4. Remove the anchor assembly bolts.
5. Remove the anchor assembly from the vehicle.

INSTALLATION PROCEDURE




1. Install the anchor assembly into the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the anchor assembly bolts.

Tighten
Tighten the bolts to 50 N.m (37 lb ft).

3. Install the battery cable fastener to the anchor assembly.
4. Install the rear seat cushion.
5. Install the rear seat backs.