SIR Steering Wheel Module Coil - Centering

Inflatable Restraint Steering Wheel Module Coil Centering

Alignment Procedure

Caution: Improper routing of the wire harness assembly may damage the inflatable restraint steering wheel module coil. This may result in a malfunction of the coil, which may cause personal injury.





1. If available remove the yellow tab (2) and save for reassembly.
2. Gently rotate the coil hub (1) clockwise until a slight tension is present.
3. Count the number of revolutions, while gently rotating the coil hub (1) counter clockwise until a slight tension is present.
4. Gently rotate the coil hub (1) clockwise one half of the previously counted revolutions.
5. Rotate the coil hut) as required to align the yellow tab (2).
6. Install the yellow tab (2) into the coil hub. Use tape if the tab is unavailable.