109. Output Speed Sensor Installation
Output Speed Sensor Installation1. Apply automatic transmission fluid to the new output speed sensor O-ring seal (63).
2. Install the new output speed sensor 0-ring seal (63) onto the output speed sensor (62).
3. Install the output speed sensor (62) into the transmission case assembly (17).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the M6 x 1.0 x 16 mm output speed sensor bolt (61).
^ Tighten the output speed sensor bolt to 3.9 - 6.9 Nm (34.5 - 61.0 inch lbs.).