44. 4-5 Clutch Piston Travel Measurement

4-5 Clutch Piston Travel Measurement
^ Tools Required
- J 45166 8" Dial Indicator Extension Rod
- J 45200 Dial Indicator Set





1. Rotate the transaxle assembly so the torque converter housing side is facing up.
2. Using the case as a holding fixture, install the front differential transfer drive gear assembly (14) into the output gear bore.
3. Install the 4-5 clutch assembly (15) onto the front differential transfer drive gear (14), with the clutch plates facing up.





4. Install the 8 mm threaded end of J 45166 (3) into the case bolt hole as indicated in the graphic.
5. Install J 45200 (2) onto J 45166 (3) as shown and set the dial indicator to zero.
6. Apply air pressure to the fluid passage (1) in the end of the 4-5 clutch drum shaft, and record the measurement. Refer to 4-5 Clutch Piston Stroke in Transmission Clearance Specifications to determine the correct backing plate.
7. Remove the 4-5 clutch drum assembly and the front differential transfer drive gear assembly from the case.