77. Transmission Fluid Baffle Installation

Transmission Fluid Baffle Installation





1. Install the transmission case fluid passage cover(40).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the 2 - M6 x 1.0 x 14 mm transmission case fluid passage cover bolts/screws (41).
^ Tighten the transmission case fluid passage cover bolts/screws to 3.9 - 6.9 Nm (34.5 - 61.0 inch lbs.).





3. Install the transmission fluid baffle (44).
4. Install the 3 - M6 x 1.0 x 14 mm transmission fluid baffle bolts/screws (45).
^ Tighten the transmission fluid baffle bolts/screws to 3.9-6.9 Nm (34.5-61.0 inch lbs.).