8. Wiring Harness Removal

Wiring Harness Removal





Important: Do not damage the wiring harness connectors.

1. Disconnect the wiring harness connectors 1-8.





2. Remove the fluid temperature sensor bolt (31).
3. Remove the fluid temperature sensor clamp (49).
4. Remove the fluid temperature sensor (36) and the O-ring (32) from the control valve body assembly.





Important: Do not break the wiring harness connectors or the fluid temperature sensor.

5. Remove the wiring harness (33) from the automatic transmission wiring harness clip.
6. With a twisting motion remove the complete wiring harness assembly.