17. Manual Shift Shaft and Parking System Components Removal

Manual Shift Shaft and Parking System Components Removal





1. Remove the park pawl reaction pin, park pawl and spring.





2. Loosen the manual shift shaft nut (46).
3. Remove the manual shift shaft (40), nut (46), detent lever (45), park pawl actuator assembly (43), manual valve link (47), spring (48) and retainer (44).
4. Remove the park pawl actuator assembly (43) from the manual shaft detent lever (45).





5. Notice: Do not damage the case bore during removal of the manual shaft seal.

Using a screwdriver, carefully remove the manual shift shaft seal assembly from the transmission case assembly. Discard the seal assembly.