29. Drive Sprocket, Driven Sprocket, and Drive Link Installation

Drive Sprocket, Driven Sprocket, and Drive Link Installation





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the bottom piece of the transmission fluid baffle and the 3 bolts on the fluid pump assembly and the transmission case assembly.
Tighten the bolts to 11 Nm (8 ft. lbs.).





2. Install the driven sprocket on the fluid pump assembly.
3. Install a NEW driven sprocket retaining ring.





4. Install a drive sprocket thrust washer on the transmission case assembly.





5. Important: The thrust washer locates the drive sprocket until the torque converter is installed.

Install the drive sprocket and drive link assembly.





6. Install the top piece of the transmission fluid baffle.