9. Drive Belt Removal

Drive Belt Removal

Tools Required
^ J44337 Build Plate Assembly





1. Notice: Use extreme care when handling the belt assembly. Avoid metal to metal contact with the sides of the belt ring sets. Do not disassemble the belt assembly. Damage to the ring sets may cause the belt to become inoperative.

Carefully remove the belt assembly.

2. Important: Do not remove the tie straps from the belt assembly.

Place the belt assembly in a clean, sealed plastic bag or box.





3. Caution: Do not lean over the driven pulley assembly when releasing the spring force. Transmission fluid may squirt upward. Failure to follow this instruction may result in personal injury.

Place a rag over the top of the driven pulley assembly in order to prevent fluid from squirting upward.
4. Using the J44337, slowly pull up on the two clamp handles in order to release the spring force on the driven pulley assembly.