Wiper Motor: Service and Repair

WIPER MOTOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the air inlet grille panel.
2. Remove the wiper drive system module.
3. Remove the wiper crank arm nut. Remove the wiper crank arm from the wiper motor.




4. Remove the wiper motor screws.
5. Remove the wiper motor from the wiper drive system module.

INSTALLATION PROCEDURE




1. Position the wiper motor to the wiper drive system module.
2. Install the wiper motor screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 8 N.m (71 lb in).

3. Install the wiper motor crank arm and crank arm nut.

Tighten the screws to 25 N.m (18 lb ft).

4. Install the wiper drive system module.
5. Install the air inlet grille panel.