Finish Panel Replacement - Front Seat - Front (Outer)

Finish Panel Replacement - Front Seat - Front (Outer)

Removal Procedure

1. Remove the front seat. Refer to Seat Replacement - Front Bucket (Seat Replacement - Front Bucket).
2. In the case of manual seats, remove the recliner handle. Refer to Seat Back Recliner Handle Replacement - Front (Seat Back Recliner Handle Replacement - Front).




3. Remove the screws from the front seat finish panel.
4. Remove the front seat finish panel from the seat, starting at the recliner end of the panel.




5. In the case of power seats, disconnect the electrical connector from the switch.

Installation Procedure




1. If you are installing a new finish panel, transfer the power seat switch to the new panel.
2. Install the front seat finish panel, starting at the front of the panel.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the screws to the finish panel.

Tighten the screws to 2.5 Nm (22 lb in).

4. In the case of manual seats, install the recliner handle. Refer to Seat Back Recliner Handle Replacement - Front (Seat Back Recliner Handle Replacement - Front).
5. Install the front seat. Refer to Seat Replacement - Front Bucket (Seat Replacement - Front Bucket).