Front Seat

REMOVAL




1. Remove front seat shoulder belt outer cover.
2. Remove shoulder belt from seat frame.




3. Move seat to full forward position and remove front seat fasteners.
4. Pull seat assembly slightly rearward to disengage seat from front set track books.
5. Tilt seat rearward and disconnect seat wiring harnesses.
6. Remove seat from vehicle and place on clean protected work surface.

INSTALLATION




1. Position seat into vehicle.
2. Tilt seat rearward and connect seat wiring harnesses.
3. Slide seat into forward tracks.
4. Apply Loctite(R) 242 Threadlocker (or equivalent) to seat fasteners and install seat fasteners.

Torque:
Seat Fasteners: 25 N.m (19 ft-lbs)




5. Install shoulder belt to seat frame.

Torque:
Shoulder Belt-to-Seat Frame Bolt: 20 N.m (15 ft-lbs)

6. Install shoulder belt outer cover.
7. If equipped, function electrical seat components to ensure proper operation.