Window Run Channel Replacement - Front Door

Window Run Channel Replacement - Front Door

Removal Procedure




1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair).
2. Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door Service and Repair.
3. Raise the window in the full up position.
4. Remove the front door inside handle. Refer to Door Handle Replacement - Front Inside (Door Handle Replacement).
5. Remove the bolt from the run channel.
6. Remove the weatherstrip and window run channel from the front door.

Installation Procedure




1. Install the window run channel and weatherstrip by sliding up into the hook latch slot.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolt to the window run channel.

Tighten the bolt to 10 Nm (89 lb in).

3. Install the front door inside handle. Refer to Door Handle Replacement - Front Inside (Door Handle Replacement).
4. Install the front door water deflector. Refer to Water Deflector Replacement - Front Door Service and Repair.
5. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair).