Windshield Upper Reveal Molding Replacement

Windshield Upper Reveal Molding Replacement

Removal Procedure

Important: The windshield molding can only be replaced by removing the windshield and then removing and installing a new windshield molding.


1. Remove the windshield. Refer to Windshield Replacement (Windshield Replacement).




2. Remove the upper windshield molding from the windshield.
3. Clean the old adhesive from the glass using isopropyl alcohol.

Installation Procedure




1. Install the windshield upper reveal molding.

Important: The adhesive is already in the service part. No additional adhesive is necessary.


2. Install the windshield. Refer to Windshield Replacement (Windshield Replacement).