Door Replacement - Front

Door Replacement - Front

Removal Procedure




1. Remove the front door outer panel. Refer to Outer Door Panel Replacement Front - Bolt On ().
2. Remove the front door sound insulator. Refer to Sound Insulator Replacement - Front Door ().
3. Remove the front door wiring harness. Refer to Wiring Harness Replacement - Front Door (Wiring Harness Replacement - Front Door).
4. Remove the front door check link. Refer to Door Check Link Replacement - Front (Service and Repair).
5. Support the door.
6. Remove the front door hinge nuts and reinforcement plates.
7. With an assistant remove the front door from the vehicle.

Installation Procedure




1. With an assistant position the front door to hinge studs.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the front door reinforcement plates and nuts to the hinge studs.

Tighten the nuts to 30 Nm (22 lb ft).

3. Install the front door check link. Refer to Door Check Link Replacement - Front (Service and Repair).
4. Install the front door wiring harness. Refer to Wiring Harness Replacement - Front Door (Wiring Harness Replacement - Front Door).
5. Verify the door is aligned properly at the header, the front A-pillar, and the rear appliques. If the door adjustment is required, refer to Door Adjustment - Front (Adjustments).
6. Install the front door insulator. Refer to Sound Insulator Replacement - Front Door ().
7. Install the front door outer panel. Refer to Outer Door Panel Replacement Front - Bolt On ().