Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement

Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster

Removal Procedure

1. Remove the knee bolster trim panel. Refer to Trim Panel Replacement - Knee Bolster (Service and Repair).
2. Remove the steering column trim cover. Refer to Steering Column Trim Covers Replacement .
3. Move steering wheel to lowest position.




4. Remove the four fasteners.
5. Remove the cluster bezel.

Installation Procedure

1. Install the cluster bezel.

Notice: Refer to Fastener Notice in Cautions and Notices.




2. Install the bezel fasteners.

Tighten the bezel fasteners to 2.5 Nm (22 lb in).

3. Install the steering column trim cover. Refer to Steering Column Trim Covers Replacement .
4. Install the knee bolster trim panel. Refer to Trim Panel Replacement - Knee Bolster (Service and Repair).