33. Cylinder Head Disassemble

CYLINDER HEAD DISASSEMBLE (UNIT REPAIR)

TOOLS REQUIRED
- SA9102E-A Valve Seal Remover/Installer
- SA9124F Valve Spring Compressor/Remover

IMPORTANT: Ensure that the valve train components are kept together and identified in order for proper re-installation in their original position.





1. Compress valve spring using Valve Spring Compressor/Remover SA9124E.
2. Remove valve keys.
3. Slowly release valve spring compressor from valve spring assembly.





4. Remove retainer.
5. Remove springs.





NOTICE: Do not damage the valve guide. Remove any burrs that have formed at the key groove by chamfering the valve stem with an oil stone or a file.

6. Remove valve seal using Valve Seal Remover/Installer SA9102E-A. Discard valve seal.
7. Remove valve.
8. Repeat for remaining valves.