Wipers/Washers - Wipers Streak During Operation
Bulletin No.: 05-08-43-002Date: February 02, 2005
TECHNICAL
Subject:
Windshield Wipers Streak During Wiper Operation (Replace Windshield Wiper Blade Assembly)
Models:
2004 Saturn ION Vehicles
Attention:
Fixed Operations Manager and Technician
Condition
Some customers may comment on windshield wipers streaking across windshield during wiper operation.
Cause
The wiper blades may be positioned at an angle that allows them to streak across windshield glass during wiper operation.
Correction
Install new wiper blade assembly (one side or both sides, as needed). Refer to service procedure in this bulletin.
Service Procedure
Wiper Arm Blade Replacement.
Removal Procedure
1. Move the wiper arm to the service up position.
2. Press the wiper blade clip button in to release the wiper blade from the inside radius of the wiper arm.
3. Remove the wiper blade out through the opening in the wiper arm.
Installation Procedure
1. Install the hook of the wiper arm through the opening in the new wiper blade.
2. Press the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
3. Position the wiper blade pivot in the inside radius of the wiper arm hook.
4. Move the wiper arm back to the parked position.
5. Operate the windshield wipers and inspect for proper operation.
Parts Information
Claim Information
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for B1783 (Blade and/or Insert [Wiper System], One or Both - Replace).
Disclaimer