Antenna Replacement - Digital Radio

ANTENNA REPLACEMENT - DIGITAL RADIO

REMOVAL PROCEDURE
1. Lower the headliner.

NOTE:
- Do NOT apply paint or clear coat to the XM band radio antenna. This will damage the function of the antenna, causing poor reception or loss of reception of the XM digital signal.
- Use care when removing or installing the headliner. Excessive bending will damage the headliner.




2. Disconnect the cables (4) from the antenna base (1).
3. Remove the retaining nut (2).
4. Remove the antenna base (1) from the top of the roof.

INSTALLATION PROCEDURE




1. Place the antenna base (1) to the roof opening.
2. Install the retaining nut (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the nut to 3.5 N.m (30 lb in).

3. Connect the antenna cables (4).
4. Install the headliner.