108. Input Speed Sensor Installation

Input Speed Sensor Installation





1. Apply automatic transmission fluid to the new input speed sensor 0-ring seal (71).
2. Install the new input speed sensor O-ring seal (71) onto the input speed sensor (73).
3. Install the input speed sensor (73) into the transmission case assembly (17).

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the M6 x 1.0 x 16 mm input speed sensor bolt (72).
^ Tighten the input speed sensor bolt (72) to 3.9 - 6.9 Nm (34.5 - 61.0 inch lbs.).