Left

DEFLECTOR REPLACEMENT - INSTRUMENT PANEL AIR - LEFT

REMOVAL PROCEDURE
1. Remove the knee bolster trim panel.




2. Remove the retaining screw.
3. Remove the deflector assembly.
4. Disconnect the electrical connector.
5. Remove the deflector from the instrument panel (I/P).

INSTALLATION PROCEDURE

IMPORTANT: If you are replacing the old deflector with a new deflector, transfer the switch to the new deflector.




1. Connect the electrical connector.
2. Position the deflector to the I/P.
3. Install the retaining screw.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screw to 2 N.m (18 lb in).

4. Install the knee bolster trim panel.