2. Transmission Holding Fixture Assemble
Transmission Holding Fixture AssembleTools Required
^ J41230 Transmission Support Fixture
^ J41230-TEM Drill Template
^ J3289-20 Support Fixture
Caution: To reduce the possibility of personal injury or transmission damage, make sure, when doing the next step, that all of the bolts for the support fixture are installed as shown, and that the bolts are tightened to 71 Nm (98 inch lbs.).
Important: J41230 should be updated using J41230-TEM due to transmission mounting changes.
1. Install the J41230 transmission support fixture onto the transmission.
2. Install the support fixture bolts.
Tighten the support fixture bolts to 11 Nm (8 ft. lbs.).
3. Install the transmission and the support fixture onto the J3289-20 fixture base.
4. Position the transmission with the side cover facing down.
5. Insert the pin into the J3289-20 fixture base in order to lock the unit into place.