Radio, Stereo, and Compact Disc: Service and Repair
AUDIO/VIDEO INTERFACE MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the rear compartment closeout panel.
2. Disconnect the electrical connectors from the rear-seat audio tee (RSAT) module.
3. Remove the double-sided tape from the back of the RSAT module (1) using a plastic flat-bladed tool.
4. Remove the RSAT module from the vehicle.
5. Remove all of the adhesive residue by using a razor knife and an isopropyl alcohol.
INSTALLATION PROCEDURE
IMPORTANT: Verify that all of the adhesive has been removed from the vehicle mounting surface.
1. Apply a double-sided tape to the RSAT module (1).
2. Install the RSAT module to the vehicle.
3. Connect the electrical connectors to the RSAT module.
4. Install the rear compartment closeout panel.