Front Bumper Reinforcement: Service and Repair

Impact Bar Replacement - Front Bumper

Removal Procedure




1. Remove the front bumper fascia. Refer to Fascia Replacement - Front Bumper (Fascia Replacement - Front Bumper).
2. Remove the front bumper energy absorber. Refer to Energy Absorber Replacement - Front (Service and Repair).
3. Remove the nuts from the front bumper impact bar studs.
4. Remove the front bumper impact bar from the front frame rails.

Installation Procedure




1. Position the front bumper impact bar to the front frame rails.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the nuts to the studs.

Tighten the nuts to 30 Nm (22 lb ft).

3. Install the front energy absorber. Refer to Energy Absorber Replacement - Front (Service and Repair).
4. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper (Fascia Replacement - Front Bumper).