Mechanical Specifications

Front Brakes
Rotor Discard Thickness * 22.8 mm (0.87 inch)
Rotor Maximum Allowable Lateral Runout 0.030 mm (0.001 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.008 mm (0.0003 inch)
Rotor Minimum Allowable Thickness After Refinish 23.1 mm (0.090 inch)
Rotor Thickness - NEW 25.0 mm (0.98 inch)
Rear Brakes
Rotor Discard Thickness * 8.0 mm (0.31 inch)
Rotor Maximum Allowable Lateral Runout 0.030 mm (0.001 inch)
Rotor Maximum Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.01 mm (0.0004 inch)
Rotor Minimum Allowable Thickness After Refinish 9.0 mm (0.035 inch)
Rotor Thickness - NEW 10.0 mm (0.39 inch)

* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum or discard thickness specifications.