Seals and Gaskets: Service and Repair

Oil Pump Seal Replacement

^ Tools Required
- J 35268-A Camshaft/Front Main Seal Installer

Removal Procedure





1. Using a seal remover or screwdriver, pry out the oil seal.
2. Ensure that the seal bore is clean and free of debris. Clean if necessary.

Installation Procedure

Important: Always ensure that the oil pump cover is properly supported when installing the seal.





1. Install the oil seal.
2. Use the J 35268-A to tap the front main oil seal into place.
2.1. Ensure that the front main oil seal is fully and evenly seated.
2.2. Apply a thin film of oil to the new seal lip.