52. Timing Belt Rear Cover Installation

Timing Belt Cover Installation - Rear

Important: Ensure that the knock sensor and the camshaft sensor wires are routed correctly before installing the cover.





1. Install the rear timing belt cover.
2. Coat the engine cover bolts with LOCTITE 242 thread locking compound or equivalent.

Notice: Refer to Fastener Notice in Service precautions.

3. Install the rear timing belt cover bolts.
^ Tighten the rear timing belt cover bolts to 8 Nm (71 inch lbs.).
4. Install rear timing belt thread pin.
^ Tighten the rear timing belt cover threaded pin to 10 Nm (89 inch lbs.).





5. Retighten the oil pump bolts.
^ Tighten the oil pump bolts to 9 Nm (80 inch lbs.).