56. Camshaft Cover Installation

Camshaft Cover Installation





1. Lightly coat the new seals, including the O-rings, with engine oil prior to the installation to assist in holding the O-ring seals to the valve cover.
2. Install the valve cover seals.
3. Apply a thin coat of silicone sealer LOCTITE 5900 or equivalent at the front and at the back of the seals.





4. Install the valve cover to the cylinder head.

Notice: Refer to Fastener Notice in Service precautions.

5. Install the valve cover bolts.
^ Tighten the camshaft cover bolts to 8 Nm (71 inch lbs.).