58. Drive Belt Tensioner Installation

Drive Belt Tensioner Installation





1. Install the belt tensioner to the engine.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the belt tensioner bolts.
^ Tighten the belt tensioner bolts to 40 Nm (30 ft. lbs.).
3. Install the A/C compressor bracket.
^ Tighten the A/C compressor bracket bolt to 40 Nm (30 ft. lbs.).
4. Install the A/C compressor.
^ Tighten the A/C compressor bolts to 20 Nm (15 ft. lbs.).
5. Install the generator.
^ Tighten the generator mounting bolts to 40 Nm (30 ft. lbs.).





6. Install the belt to the accessory drive pulleys.
7. Use a wrench on the center bolt of the tensioner pulley and rotate it downward to install the belt to the tensioner.
8. Tighten the water pump pulley bolts.
^ Tighten the water pump pulley bolts to 8 Nm (71 inch lbs.).
9. Tighten the power steering pump pulley bolts.
^ Tighten the power steering pump pulley bolts to 20 Nm (15 ft. lbs.).