60. Exhaust Manifold Installation

Exhaust Manifold Installation

^ Tools Required
- J 39194-C Oxygen Sensor Wrench





1. Install the rear exhaust manifold gasket.
2. Install the rear exhaust manifold.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the exhaust manifold nuts.
^ Tighten the exhaust manifold nuts to 20 Nm (15 ft. lbs.).





4. Install the oxygen sensor using the J 39194-C.
^ Tighten the oxygen sensors, exhaust manifold, to 50 Nm (37 ft. lbs.).
5. Install the front exhaust manifold gasket.
6. Install the rear exhaust manifold.
7. Install the exhaust manifold nuts.
^ Tighten the exhaust manifold nuts to 20 Nm (15 ft. lbs.).