Instrument Panel Cluster (IPC) - Replacement

INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT

REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) cluster trim bezel.
2. Position the steering column to its lowest position.




3. Remove the cluster fasteners.
4. Remove the cluster from the I/P.

INSTALLATION PROCEDURE




1. Install the cluster into the I/P.

2.Install the fasteners.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the fasteners to 2.5 N.m (22 lb in).

3. Install the I/P cluster trim bezel.