Door Switch: Service and Repair

DOOR JAMB SWITCH REPLACEMENT - FRONT

REMOVAL PROCEDURE
Left front door shown. The rest of the doors are similar.




1. Remove the screw (1).
2. Remove the switch from the door pillar. May need to pry the switch out with a flat-bladed tool.
3. Disconnect the wire harness.

INSTALLATION PROCEDURE




1. Install the connector to the switch.
2. Install the switch
3. Install the screw (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screw (1) to 2 N.m (18 lb in).