Frontal Inflator Module Deployment - Component Replacement and Inspections

FRONTAL INFLATOR MODULE DEPLOYMENT - COMPONENT REPLACEMENT AND INSPECTIONS
After a collision involving inflator module deployment, replace the following components.
- Inflatable restraint I/P module
- Inflatable restraint sensing and diagnostic module (SDM).
- Inflatable restraint steering wheel module

Perform additional inspections on the following components:
- Inflatable restraint steering wheel module coil and coil wiring pigtail - Inspect for melting, scorching, or other damage due to excessive heat.
- Mounting points and mounting hardware for the inflatable restraint I/P module, steering wheel module, and SDM - Inspect for any damage and repair or replace each component as needed.