Steering Column Trim Covers

Steering Column Trim Covers Replacement

Removal Procedure





1. Remove the lock cylinder bezel from the steering column shroud by carefully prying with a thin-bladed screwdriver.





2. Remove the upper steering column trim cover.
3. Remove the 3 lower steering column trim cover from the steering column attachment screws.
4. Remove the lower steering column trim cover.

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the steering column trim covers and attachment fasteners.
Tighten the steering column trim cover attaching fasteners to 4 Nm (35 inch lbs.).





2. Install the ignition switch bezel.