10. Output Shaft Sleeve Removal

Output Shaft Sleeve Removal

Tools Required
^ J41227 Output Shaft Sleeve Puller






Notice: Do not remove the output shaft (94) in the same manner as the stub shaft. In order to remove the output shaft (94), you must completely disassemble the transmission. Removing the output shaft (94) at this time will damage other transmission components.

1. Remove snap ring (57).





2. Insert the legs of J41227 under the output shaft sleeve (56).
3. Tighten the center bolt of the J41227 down in order to pull the output shaft sleeve (56) off the output shaft (94).
4. Remove and discard the output shaft sleeve (56). Use the J41227. The output shaft sleeve is not reusable.