80. Drive Sprocket Support Assemble
Drive Sprocket Support AssembleTools Required
^ J23327 Clutch Spring Compressor
^ J41232 Return Spring Compressor
1. In order to aid in the assembly, lubricate the seal with transmission fluid.
2. Assemble the 2nd clutch piston and seal assembly (404) into the driven sprocket support (401).
3. Assemble the 2nd clutch spring and retainer assembly (405) into the driven sprocket support.
4. Compress the 2nd clutch spring assembly. Use the J41232 and J23327.
5. Assemble the 2nd clutch spring retainer snap ring (406).
6. Remove the J41232 and J23327.
7. Assemble two new seal rings (403) onto the driven sprocket support.