Flex Plate: Service and Repair

Flexplate Replacement

^ Tools Required
- J 42098 Crank Hub TORX Socket

Removal Procedure





1. Remove the transmission.
2. Use the J 42098 to counterhold the crankshaft to remove the flexplate bolts.
3. Remove the flexplate from the crankshaft.
4. Clean the rear crankshaft flange.

Installation Procedure





1. Install the flexplate to the crankshaft.
^ Use new flex plate bolts.
^ Coat the new flex plate bolts with LOCTITE 272 Threadlocker or equivalent.
2. Use the J 42098 to counterhold the crankshaft and install the flexplate bolts.
^ Tighten the flex plate bolt to 65 Nm (48 lb ft) plus 30° plus 15°.
3. Install the transmission.