Grille: Service and Repair

Fascia Grille Replacement - Front Bumper - Lower

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.




2. Disconnect the fog lamp bulb connector, if equipped.
3. Remove the front fascia. Refer to Fascia Replacement - Front Bumper (Fascia Replacement - Front Bumper) .




4. Remove the screws from the lower grille to the fascia.
5. Remove the lower grille from the fascia.
6. Remove the lower grille from the fascia.



Installation Procedure





1. Position the lower grille to the fascia. Press the grille into place.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the lower grille retaining screws.

Tighten the screws to 2.5 N.m (22 lb in).

3. Install the front fascia. Refer to Fascia Replacement - Front Bumper (Fascia Replacement - Front Bumper) .




4. Connect the fog lamp bulb connector, if equipped.
5. Lower the vehicle