Cowl Moulding / Trim: Service and Repair

Air Inlet Grille Panel Replacement

Removal Procedure

1. Remove the wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.




2. Remove the push pin fasteners in the cowl vent screen.
3. Disconnect the washer fluid hose.
4. Remove the cowl vent screen.



Installation Procedure





1. Install the cowl vent screen.
2. Connect the washer fluid hose.
3. Install the push pin fasteners to the cowl vent screen.
4. Install the wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.