Instrument Panel Compartment - Handle Replacement

Handle Replacement - Instrument Panel (I/P) Compartment

Removal Procedure

1. Open the instrument panel (I/P) compartment.




2. Remove the I/P compartment latch access panel.




3. Remove the I/P compartment latch screws and latch.




4. Remove the I/P compartment latch rod.




5. Slide the I/P compartment handle retaining clip to the right to remove.
6. Remove the I/P compartment handle.



Installation Procedure





1. Install the I/P compartment handle.
2. Slide the I/P compartment handle retaining clip to the left to lock the handle in place.




3. Install the I/P compartment latch rod.





Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the I/P compartment latch and screws.

Tighten the I/P compartment latch screws to 2.5 N.m (22 lb in).





5. Install the I/P compartment latch access panel.
6. Close the I/P compartment.