Seat Back Panel Replacement - Front (Fold Flat)

SEAT BACK PANEL REPLACEMENT - FRONT (FOLD FLAT)

REMOVAL PROCEDURE




1. Position the seat back in the fold flat position.
2. Remove the screws from the seat back trim panel.
3. Slide the trim panel rearward to disengage the top hook from the seat back.
4. Remove the trim panel from the seat.

INSTALLATION PROCEDURE




1. Position the trim panel to the seat back. Ensure that the top hook is engaged in the seat back.
2. Install the screws to the trim panel

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 1 N.m (9 lb in).

3. Raise the seat back to the upright position.