56. Crankshaft Front Oil Seal Installation

Crankshaft Front Oil Seal Installation

^ Tools Required
- J 35268-A Camshaft/Front Main Seal Installer





1. Install the seal into the front cover by driving it in from the timing chain side, using the J35268-A.
2. Ensure that the engine front cover is properly supported when installing the seal.


Engine Front Cover and Oil Pump Installation





1. Install the engine front cover with a new gasket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the long water pump bolt.
^ Tighten the water pump bolt to 25 Nm (18 ft. lbs.).





3. Install the engine front cover bolts.
^ Tighten the engine front cover bolts to 25 Nm (18 ft. lbs.).





4. Install the accessory drive belt tensioner.
^ Tighten the accessory drive belt tensioner bolt to 45 Nm (33 ft. lbs.).