Air Cleaner Housing: Service and Repair

AIR CLEANER ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Loosen the outlet duct clamp at the air cleaner assembly.




2. Remove the air cleaner assembly attachment nut.
3. Remove the air cleaner.

INSTALLATION PROCEDURE
1. Position the air cleaner assembly.

IMPORTANT: Verify full engagement of the inlet onto the resonator neck.

2. Install the air cleaner assembly attachment nut.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nut to 10 N.m (89 lb in).




3. Connect the air cleaner resonator to the air cleaner assembly.

Tighten the air cleaner intake duct clamp to 5 N.m (44 lb in).