14. Clutch Housing Assemble

Clutch Housing Assemble

Tools Required
^ 83-90-114 Sleeve
^ 83-90-312 Drift, Bearing Race Input Shaft
^ 87-91-220 Drift, Main Shift Rod Bushing
^ 87-91-311 Sleeve, Bearing Driver Shaft
^ 87-92-210 Support, Differential Bearing
^ 87-92-236 Support
^ SA9113T Axle Seal Installer
^ SA9172G Ball Detent Handle





1. Press in the new differential bearing race using the SA9113T and the SA9172G. Use the 87-92-236 as a base for the pressing operation.





2. Install the new axle using the SA9113T and SA9172G.





3. Press in the new input shaft bearing race using the 83-90-312. Use the 83-90-114 and the 87-91-311 as a base for the pressing operation.