Generator Replacement (LZ4)

Generator Replacement (LZ4)

Removal Procedure

Important: Service the generator as a complete unit.




1. Disconnect the negative battery cable.
2. Remove the drive belt.
3. Remove the generator electrical connections.
4. Remove the generator mounting nuts and bolts.
5. Remove the generator.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the generator.

* Tighten the bolts to 50 N.m (37 lb ft).
* Tighten the nuts to 30 N.m (22 lb ft).

2. Install the generator electrical connections.
3. Install the drive belt.
4. Connect the negative battery cable.